Re: [crux-arm] setup chromium - [1:1:0100/000000.534166:ERROR:broker_posix.cc(41)] Invalid node channel message
* Milan Bu??ka (milan.buska@gmail.com) wrote:
Hi Victor
2017-06-28 10:46 GMT+02:00 Victor Martinez <pitillo@crux-arm.nu>:
* Milan Bu??ka (milan.buska@gmail.com) wrote:
2017-06-26 16:16 GMT+02:00 Milan Bu??ka <milan.buska@gmail.com>:
Hello everyone
Hey Milan,
After 10 hours of compiling Chromium 59.0.3071.109, I get a message after running:
[1: 1: 0100 / 000000.534166: ERROR: broker_posix.cc (41)] Invalid node channel message
Does anyone know if it is going to fix it or it is for a new recompilation.
Note: The compilation was done for the "ARM" architecture, so I apologize in advance for sending this message to the mailing list (lists.crux.nu). Maybe this is not an architecture-specific error.
Repair
I attach a link to broker_posix.cc https://chromium.googlesource.com/chromium/src/+blame/refs/heads/master/mojo...
https://chromium.googlesource.com/chromium/src/+blame/59.0.3071.109/mojo/edk...
Line 41 error Line 43 "Invalid node channel message"
Line 41 "Invalid node channel message"
Finally - I do not speak the English language so this message has been created via a google translator - please do not stone me for it
Best regards
Here I've built it on the cubieboard2 without problems but I've found at run time some of them.
When I start chromium I can see this error and currently I'm trying to get some time to deep into it:
[13761:13795:0625/150130.122737:ERROR:browser_gpu_channel_host_factory.cc(103)] Failed to launch GPU process. Received signal 4 <unknown> 0000b373284a
Not many time recently to figure out what's happening, but I'll try to update this thread if I find something interesting.
Milan Buska
Regards,
Thank you for answer.
I used CFLAGS when compiling - CFLAGS="-O2 -pipe -march=armv7ve -mtune=cortex-a15 -mfpu=neon -mfloat-abi=hard -mabi=aapcs-linux -marm -mtls-dialect=gnu" CXXFLAGS="${CFLAGS}"
I try to change - CFLAGS="-O2 -pipe -march=armv7ve -mtune=cortex-a15 -mfpu=vfpv4 -mfloat-abi=hard -mabi=aapcs-linux -marm -mtls-dialect=gnu" CXXFLAGS="${CFLAGS}"
$ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
Hardware : NVIDIA Tegra SoC (Flattened Device Tree) Revision : 0000 Serial : 0000000000000000
Another alternative
Select a version that does not depend on the nodejs
I will report with what results.
Regards
Milan
-- Hey Milan, I've made some tests on the last veesion: https://crux-arm.nu/gitweb?p=ports/opt-arm.git;a=commitdiff;h=c4acdcba5460e6...
and it's working fine now on the cubieboard2. Could you verify in your device and report problems please? Regards, --- Victor Martinez Learning bit by bit | http://vjml.es
Hi Victor. My system fully functional. Problem: source=( http://commondatastorage.googleapis.com/$name-browser-official/$name-$versio... \ last-commit-position.patch *$name-build-toolchain.patch* $name-gn-bootstrap-r2.patch $name.sh $name.desktop chromium-blink-gcc7.patch chromium-v8-gcc7.patch chromium-gn-bootstrap-r8.patch) Where can i find this patch - $name-build-toolchain.patch Milan 2017-08-12 23:01 GMT+02:00 Victor Martinez <pitillo@crux-arm.nu>:
Hi Victor
2017-06-28 10:46 GMT+02:00 Victor Martinez <pitillo@crux-arm.nu>:
* Milan Bu??ka (milan.buska@gmail.com) wrote:
2017-06-26 16:16 GMT+02:00 Milan Bu??ka <milan.buska@gmail.com>:
Hello everyone
Hey Milan,
After 10 hours of compiling Chromium 59.0.3071.109, I get a message after running:
[1: 1: 0100 / 000000.534166: ERROR: broker_posix.cc (41)] Invalid node channel message
Does anyone know if it is going to fix it or it is for a new recompilation.
Note: The compilation was done for the "ARM" architecture, so I apologize in advance for sending this message to the mailing list (lists.crux.nu). Maybe this is not an architecture-specific error.
Repair
I attach a link to broker_posix.cc https://chromium.googlesource.com/chromium/src/+blame/refs/
* Milan Bu??ka (milan.buska@gmail.com) wrote: heads/master/mojo/edk/system/broker_posix.cc
3071.109/mojo/edk/system/broker_posix.cc
Line 41 error Line 43 "Invalid node channel message"
Line 41 "Invalid node channel message"
Finally - I do not speak the English language so this message has
been created
via a google translator - please do not stone me for it
Best regards
Here I've built it on the cubieboard2 without problems but I've found at run time some of them.
When I start chromium I can see this error and currently I'm trying to get some time to deep into it:
[13761:13795:0625/150130.122737:ERROR:browser_gpu_channel_host_factory.cc(103)] Failed to launch GPU process. Received signal 4 <unknown> 0000b373284a
Not many time recently to figure out what's happening, but I'll try to update this thread if I find something interesting.
Milan Buska
Regards,
Thank you for answer.
I used CFLAGS when compiling - CFLAGS="-O2 -pipe -march=armv7ve -mtune=cortex-a15 -mfpu=neon -mfloat-abi=hard -mabi=aapcs-linux -marm -mtls-dialect=gnu" CXXFLAGS="${CFLAGS}"
I try to change - CFLAGS="-O2 -pipe -march=armv7ve -mtune=cortex-a15 -mfpu=vfpv4 -mfloat-abi=hard -mabi=aapcs-linux -marm -mtls-dialect=gnu" CXXFLAGS="${CFLAGS}"
$ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
Hardware : NVIDIA Tegra SoC (Flattened Device Tree) Revision : 0000 Serial : 0000000000000000
Another alternative
Select a version that does not depend on the nodejs
I will report with what results.
Regards
Milan
-- Hey Milan, I've made some tests on the last veesion: https://crux-arm.nu/gitweb?p=ports/opt-arm.git;a=commitdiff;h= c4acdcba5460e6c47a933fe3c0158de5ba9e7c05
and it's working fine now on the cubieboard2.
Could you verify in your device and report problems please?
Regards,
--- Victor Martinez Learning bit by bit | http://vjml.es
-- ---------------------------------------------------------------------------- Remember, no question is too stupid and no problem too small--We've all been beginners
Hi Victor. Build chromium 60.0.3112.113 - OK (Toolchain - kernel 4.10.8, glibc 2.26, binutils 2.29, gcc 7.2) Append patches Regards 2017-08-12 23:01 GMT+02:00 Victor Martinez <pitillo@crux-arm.nu>:
Hi Victor
2017-06-28 10:46 GMT+02:00 Victor Martinez <pitillo@crux-arm.nu>:
* Milan Bu??ka (milan.buska@gmail.com) wrote:
2017-06-26 16:16 GMT+02:00 Milan Bu??ka <milan.buska@gmail.com>:
Hello everyone
Hey Milan,
After 10 hours of compiling Chromium 59.0.3071.109, I get a message after running:
[1: 1: 0100 / 000000.534166: ERROR: broker_posix.cc (41)] Invalid node channel message
Does anyone know if it is going to fix it or it is for a new recompilation.
Note: The compilation was done for the "ARM" architecture, so I apologize in advance for sending this message to the mailing list (lists.crux.nu). Maybe this is not an architecture-specific error.
Repair
I attach a link to broker_posix.cc https://chromium.googlesource.com/chromium/src/+blame/refs/
* Milan Bu??ka (milan.buska@gmail.com) wrote: heads/master/mojo/edk/system/broker_posix.cc
3071.109/mojo/edk/system/broker_posix.cc
Line 41 error Line 43 "Invalid node channel message"
Line 41 "Invalid node channel message"
Finally - I do not speak the English language so this message has
been created
via a google translator - please do not stone me for it
Best regards
Here I've built it on the cubieboard2 without problems but I've found at run time some of them.
When I start chromium I can see this error and currently I'm trying to get some time to deep into it:
[13761:13795:0625/150130.122737:ERROR:browser_gpu_channel_host_factory.cc(103)] Failed to launch GPU process. Received signal 4 <unknown> 0000b373284a
Not many time recently to figure out what's happening, but I'll try to update this thread if I find something interesting.
Milan Buska
Regards,
Thank you for answer.
I used CFLAGS when compiling - CFLAGS="-O2 -pipe -march=armv7ve -mtune=cortex-a15 -mfpu=neon -mfloat-abi=hard -mabi=aapcs-linux -marm -mtls-dialect=gnu" CXXFLAGS="${CFLAGS}"
I try to change - CFLAGS="-O2 -pipe -march=armv7ve -mtune=cortex-a15 -mfpu=vfpv4 -mfloat-abi=hard -mabi=aapcs-linux -marm -mtls-dialect=gnu" CXXFLAGS="${CFLAGS}"
$ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 80.01 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc0f CPU revision : 3
Hardware : NVIDIA Tegra SoC (Flattened Device Tree) Revision : 0000 Serial : 0000000000000000
Another alternative
Select a version that does not depend on the nodejs
I will report with what results.
Regards
Milan
-- Hey Milan, I've made some tests on the last veesion: https://crux-arm.nu/gitweb?p=ports/opt-arm.git;a=commitdiff;h= c4acdcba5460e6c47a933fe3c0158de5ba9e7c05
and it's working fine now on the cubieboard2.
Could you verify in your device and report problems please?
Regards,
--- Victor Martinez Learning bit by bit | http://vjml.es
-- ---------------------------------------------------------------------------- Remember, no question is too stupid and no problem too small--We've all been beginners
participants (2)
-
Milan Buška -
Victor Martinez