Hello,
I have a proprietary device with i.MX 6Quad 32-bit processor (ARMv7 Cortex-A9 core) which is running Debian 8 (jessie). I created a separate Crux root partition, downloaded
http://resources.crux-arm.nu/releases/3.3/crux-arm-rootfs-3.3.tar.xz, extracted its contents in to the new partition, modified rc.conf, shadow and sshd_config files and booted into the Crux. Keyboard and mouse on the console are not working, but I can ssh to the system and work on it remotely.
On Crux "dmesg | grep -i usb" returns:
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver udl
usbcore: registered new interface driver dln2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore: registered new interface driver usb-storage
2184200.usb supply vbus not found, using dummy regulator
ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.0+ ehci_hcd
usb usb1: SerialNumber: ci_hdrc.1
hub 1-0:1.0: USB hub found
usb0: HOST MAC 22:76:48:b0:7b:c3
usb0: MAC 86:81:e4:b2:91:5c
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb_otg_vbus: disablingOn Debian "dmesg | grep -i usb" returns (lines in bold are identical for Crux and Debian, the rest on Debian is loaded by systemd):
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver udl
usbcore: registered new interface driver dln2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usbcore: registered new interface driver usb-storage
2184200.usb supply vbus not found, using dummy regulator
ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.0+ ehci_hcd
usb usb1: SerialNumber: ci_hdrc.1
hub 1-0:1.0: USB hub found
usb0: HOST MAC 56:8d:e9:dc:85:d7
usb0: MAC 6e:fa:25:5b:03:8e
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb_otg_vbus: disabling
usb 1-1: New USB device found, idVendor=0424, idProduct=2514
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high-speed USB device number 3 using ci_hdrc
usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 2 ports detected
usb 1-1.2: new low-speed USB device number 4 using ci_hdrc
usb 1-1.2: New USB device found, idVendor=0461, idProduct=4d64
usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.2/1-1.2:1.0/0003:0461:4D64.0001/input/input1
hid-generic 0003:0461:4D64.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-ci_hdrc.1-1.2/input0
usb 1-1.1.1: new full-speed USB device number 5 using ci_hdrc
usb 1-1.1.1: New USB device found, idVendor=156a, idProduct=0008
usb 1-1.1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.1.1: Product: Logical ImposterK
input: Logical ImposterK as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:156A:0008.0002/input/input2
usb 1-1.3: new low-speed USB device number 6 using ci_hdrc
hid-generic 0003:156A:0008.0002: input,hidraw1: USB HID v1.10 Keyboard [Logical ImposterK] on usb-ci_hdrc.1-1.1.1/input0
input: Logical ImposterK as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/0003:156A:0008.0003/input/input3
usb 1-1.3: New USB device found, idVendor=046d, idProduct=c31d
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Keyboard
usb 1-1.3: Manufacturer: Logitech
hid-generic 0003:156A:0008.0003: input,hidraw2: USB HID v1.10 Device [Logical ImposterK] on usb-ci_hdrc.1-1.1.1/input1
input: Logitech USB Keyboard as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C31D.0004/input/input4
usb 1-1.1.2: new full-speed USB device number 7 using ci_hdrc
hid-generic 0003:046D:C31D.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-ci_hdrc.1-1.3/input0
input: Logitech USB Keyboard as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C31D.0005/input/input5
m25p80 spi4.0: s25fl064k (8192 Kbytes)
hid-generic 0003:046D:C31D.0005: input,hidraw4: USB HID v1.10 Device [Logitech USB Keyboard] on usb-ci_hdrc.1-1.3/input1
usb 1-1.1.2: New USB device found, idVendor=156a, idProduct=0009
usb 1-1.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.1.2: Product: Logical ImposterM
input: Logical ImposterM as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/0003:156A:0009.0006/input/input6
hid-generic 0003:156A:0009.0006: input,hidraw5: USB HID v1.10 Mouse [Logical ImposterM] on usb-ci_hdrc.1-1.1.2/input0
lsmod on Crux retrurns:
Module Size Used by
cfg80211 485728 0
m25p80 7879 0
spi_nor 22158 1 m25p80
lsmod on Debian returns:
Module Size Used by
joydev 9812 0
sg 31856 0
m25p80 7879 0
spi_nor 22158 1 m25p80
Would appreciate if you can point me in the right direction on how to make keyboard and mouse recognized.
Thank you,
Matt