- CRUX-ARM - lists.crux-arm.nu

Re: [crux-arm] crux-arm setup firefox error - segmentation fault
by Victor Martinez 03 Feb '17

03 Feb '17

* Milan Bu??ka (milan.buska(a)gmail.com) wrote: > Hi Victor > > 2017-02-02 15:17 GMT+01:00 Victor Martinez <pitillo(a)crux-arm.nu>: > > * Milan Bu??ka (milan.buska(a)gmail.com) wrote: > >> Hi Victor > >> > Hey! > > Hello again Milan, > > > >> Compile with options O0 gives the same error. > > I can confirm the same. I've built firefox without optimizations and it's still segfaulting. > > > >> My suggestion is to move the package from nspr opt to opt-arm > >> and adjust Pkgfile for detailed specification of the ARM 32-bit architecture. > > Good catch I'll review nspr and give a try with a rebuild. > > > >> I suspect that this error depends on compilations since nspr. > >> I'll try to compile firefox with modified nspr and nss packages. > >> > >> Have a nice day > > Same there. I'll update with results. > > > >> Milan > >> > > nspr => enable-64bit on disable-64bit > firefox => delete line ac_add_options --with-pthreads > > I deleted a line ac_add_options --with-pthreads > maybe it should just be pthread - I do not know > But after adjustments and subsequent compilation Firefox starts without errors. > Very good catch Milan. I've modified nspr, rebuilt nss and firefox and the problem persists. I'll update firefox port with your suggestions and I'll check tomorrow, if it works right, I'll push changes for nspr and firefox at saturday night. I was near to revert nss and firefox ports because I wasn't abke to deep in to the problem more than removing optimizations. Thank you very much for your research and fixes provided. You have Flyspray and IRC too to contact us, but ML is fine (just as a reminder). > Have a nice day > Milan > Best Regards, --- Victor Martinez Learning bit by bit | http://vjml.es

1 0

crux-arm setup firefox error - segmentation fault
by Milan Buška 02 Feb '17

02 Feb '17

Hello. Can you advise me where to start looking for a mistake why not start firefox. When run in a terminal am getting 1485791758698 addons.manager ERROR Exception loading default provider "resource://gre/modules/addons/XPIProvider.jsm": [Exception... "Component returned failure code: 0x80570016 (NS_ERROR_XPC_GS_RETURNED_FAILURE) [nsIJSCID.getService]" nsresult: "0x80570016 (NS_ERROR_XPC_GS_RETURNED_FAILURE)" location: "JS frame :: resource://gre/modules/addons/XPIProvider.jsm :: <TOP_LEVEL> :: line 1769" data: no] Stack trace: resource://gre/modules/addons/XPIProvider.jsm:1769 < AddonManagerInternal.startup()@resource://gre/modules/AddonManager.jsm:925 < this.AddonManagerPrivate.startup()@resource://gre/modules/AddonManager.jsm:3016 < amManager.prototype.observe()@resource://gre/components/addonManager.js:71 Assertion failure: NS_IsMainThread(), at /usr/ports/opt-arm/firefox/work/src/firefox-51.0/security/manager/ssl/nsNSSComponent.cpp:259 Segmentation fault nss version 3.28.1 machine tegra jetson tk-1 Regards, Milan -- ---------------------------------------------------------------------------- Remember, no question is too stupid and no problem too small--We've all been beginners

3 4

Re: [crux-arm] Compiling web browser on RPI2
by Víctor Martínez 05 Aug '16

05 Aug '16

El 05/08/2016 14:49, Guido Caliandro <guido.caliandro(a)gmail.com> escribió: > > Hi Victor, > no I haven't change the PkgFile > After passing to the external USB HDD all of my builds works as expected > Great, thank you for clarify. > Ciao > Guido > Regards, Victor. > 2016-08-05 13:50 GMT+02:00 Víctor Martínez <pitillo(a)crux-arm.nu>: >> >> >> El 04/08/2016 20:59, matti christensen <mattic(a)iki.fi> escribió: >> > >> > >> > Hello >> > >> Hey Matti, >> >> > i've also been trying to build Firefox and Icecat on pi without success; >> > >> > -- libxul linking crashes to 'read only segment has dynamic relocations' ... >> > >> This seems another error where we can't help because we haven't an rpi2 to reproduce the problem and look for a solution. >> >> It's strange that you aren't able to build current versions of FF. Did you modify FF Pkgfile? Guido seems to be able to build it under the rpi2 but I don't know if he is using our Pkgfile or if he modified it. >> >> > -- i have about 16GB swap on usb stick >> > >> That's more than enought. >> >> > -- my configure attached >> > >> > Comments ? >> > >> Sorry because we can't help much more. >> >> > /mc >> > >> Regards, Victor. >> >> > >> > >> > Quoting Víctor Martínez <pitillo(a)crux-arm.nu>: >> > >> > > Hey Guido, >> > > to build firefox (I haven't tested midori but if it needs qt you'll >> > > hit the same problem while building that beast) you need a big >> > > amount of swap. I've built firefox and chromium on the cubieboard2 >> > > without problems but I'm using 14GB of swap file. Probably only >> > > ~8-9GB are needed. >> > > >> > > If you can give a try and report it'd be great. >> > > >> > > Regards, >> > > >> > > Victor Martinez >> > > Learning bit by bit | http://vjml.es >> > > >> > > El 04/06/2016 11:31, Guido Caliandro <guido.caliandro(a)gmail.com> escribió: >> > >> >> > >> Hi all, >> > >> I'm trying to compile a web browser on my RPI2 on crux-arm 3.2, but >> > >> every time I try (Firefox or Midori), the build fails killing >> > >> cc1plus because of a low memory issue. >> > >> I freed the GPU ram to leave all available memory to the build >> > >> process, but I had same result. >> > >> >> > >> I also tried to cross compile them using pkgutils-cross and >> > >> toolchain but no success >> > >> >> > >> I'm considering qemu and a virtual system... what do you think about that? >> > >> Is there any guide to this kind of processes? >> > >> >> > >> Thank you for your help >> > >> >> > >> Best regards >> > >> >> > >> Guido >> > > _______________________________________________ >> > > crux-arm mailing list >> > > crux-arm(a)crux-arm.nu >> > > https://crux-arm.nu/mailman/listinfo/crux-arm >> > >> > >> > >> > keep-IT-simple >> > >> > _______________________________________________ >> > crux-arm mailing list >> > crux-arm(a)crux-arm.nu >> > https://crux-arm.nu/mailman/listinfo/crux-arm >> _______________________________________________ >> crux-arm mailing list >> crux-arm(a)crux-arm.nu >> https://crux-arm.nu/mailman/listinfo/crux-arm > >

1 0

Re: [crux-arm] Compiling web browser on RPI2
by Víctor Martínez 05 Aug '16

05 Aug '16

El 04/08/2016 20:59, matti christensen <mattic(a)iki.fi> escribió: > > > Hello > Hey Matti, > i've also been trying to build Firefox and Icecat on pi without success; > > -- libxul linking crashes to 'read only segment has dynamic relocations' ... > This seems another error where we can't help because we haven't an rpi2 to reproduce the problem and look for a solution. It's strange that you aren't able to build current versions of FF. Did you modify FF Pkgfile? Guido seems to be able to build it under the rpi2 but I don't know if he is using our Pkgfile or if he modified it. > -- i have about 16GB swap on usb stick > That's more than enought. > -- my configure attached > > Comments ? > Sorry because we can't help much more. > /mc > Regards, Victor. > > > Quoting Víctor Martínez <pitillo(a)crux-arm.nu>: > > > Hey Guido, > > to build firefox (I haven't tested midori but if it needs qt you'll > > hit the same problem while building that beast) you need a big > > amount of swap. I've built firefox and chromium on the cubieboard2 > > without problems but I'm using 14GB of swap file. Probably only > > ~8-9GB are needed. > > > > If you can give a try and report it'd be great. > > > > Regards, > > > > Victor Martinez > > Learning bit by bit | http://vjml.es > > > > El 04/06/2016 11:31, Guido Caliandro <guido.caliandro(a)gmail.com> escribió: > >> > >> Hi all, > >> I'm trying to compile a web browser on my RPI2 on crux-arm 3.2, but > >> every time I try (Firefox or Midori), the build fails killing > >> cc1plus because of a low memory issue. > >> I freed the GPU ram to leave all available memory to the build > >> process, but I had same result. > >> > >> I also tried to cross compile them using pkgutils-cross and > >> toolchain but no success > >> > >> I'm considering qemu and a virtual system... what do you think about that? > >> Is there any guide to this kind of processes? > >> > >> Thank you for your help > >> > >> Best regards > >> > >> Guido > > _______________________________________________ > > crux-arm mailing list > > crux-arm(a)crux-arm.nu > > https://crux-arm.nu/mailman/listinfo/crux-arm > > > > keep-IT-simple > > _______________________________________________ > crux-arm mailing list > crux-arm(a)crux-arm.nu > https://crux-arm.nu/mailman/listinfo/crux-arm

2 1

Re: [crux-arm] Compiling web browser on RPI2
by Víctor Martínez 04 Aug '16

04 Aug '16

Hey Guido, to build firefox (I haven't tested midori but if it needs qt you'll hit the same problem while building that beast) you need a big amount of swap. I've built firefox and chromium on the cubieboard2 without problems but I'm using 14GB of swap file. Probably only ~8-9GB are needed. If you can give a try and report it'd be great. Regards, Victor Martinez Learning bit by bit | http://vjml.es El 04/06/2016 11:31, Guido Caliandro <guido.caliandro(a)gmail.com> escribió: > > Hi all, > I'm trying to compile a web browser on my RPI2 on crux-arm 3.2, but every time I try (Firefox or Midori), the build fails killing cc1plus because of a low memory issue. > I freed the GPU ram to leave all available memory to the build process, but I had same result. > > I also tried to cross compile them using pkgutils-cross and toolchain but no success > > I'm considering qemu and a virtual system... what do you think about that? > Is there any guide to this kind of processes? > > Thank you for your help > > Best regards > > Guido

3 3

Re: [crux-arm] Compiling web browser on RPI2
by Víctor Martínez 08 Jul '16

08 Jul '16

That sounds great Guido. I'm using an external usb hdd for this pourpose (pkgmk work dir and a swap file). Lot of patience with this big build. I hope it'll finish right soon. Regards, Victor. Victor Martinez Learning bit by bit | http://vjml.es El 06/06/2016 12:54, Guido Caliandro <guido.caliandro(a)gmail.com> escribió: > > Hi Victor, > Thanks for your suggestion, I'm sure you found one of my problems, because I had no swap at all on my system, and now the build process works longer than before. > I'm having another problem now: After many hours of work, it freeze.... > I'm considering the fact that my sdcard could be too much stressed, so at this moment I booted from root=/dev/sda1 (an external usb HDD) and it's working at the moment... > I'm waiting for the build to complete and I let you know... > > Thanks again > > Regards, > > Guido > > > 2016-06-04 15:04 GMT+02:00 Víctor Martínez <pitillo(a)crux-arm.nu>: >> >> Hey Guido, >> to build firefox (I haven't tested midori but if it needs qt you'll hit the same problem while building that beast) you need a big amount of swap. I've built firefox and chromium on the cubieboard2 without problems but I'm using 14GB of swap file. Probably only ~8-9GB are needed. >> >> If you can give a try and report it'd be great. >> >> Regards, >> >> Victor Martinez >> Learning bit by bit | http://vjml.es >> >> El 04/06/2016 11:31, Guido Caliandro <guido.caliandro(a)gmail.com> escribió: >> > >> > Hi all, >> > I'm trying to compile a web browser on my RPI2 on crux-arm 3.2, but every time I try (Firefox or Midori), the build fails killing cc1plus because of a low memory issue. >> > I freed the GPU ram to leave all available memory to the build process, but I had same result. >> > >> > I also tried to cross compile them using pkgutils-cross and toolchain but no success >> > >> > I'm considering qemu and a virtual system... what do you think about that? >> > Is there any guide to this kind of processes? >> > >> > Thank you for your help >> > >> > Best regards >> > >> > Guido > >

1 0

Compiling web browser on RPI2
by Guido Caliandro 04 Jun '16

04 Jun '16

Hi all, I'm trying to compile a web browser on my RPI2 on crux-arm 3.2, but every time I try (Firefox or Midori), the build fails killing cc1plus because of a low memory issue. I freed the GPU ram to leave all available memory to the build process, but I had same result. I also tried to cross compile them using pkgutils-cross and toolchain but no success I'm considering qemu and a virtual system... what do you think about that? Is there any guide to this kind of processes? Thank you for your help Best regards Guido

2 1

CRUX-ARM 3.2 64b pine64 rootfs RC1 ready for testing
by Víctor Martínez 23 May '16

23 May '16

Hello all, we have ready crux-arm-rootfs-3.2-64b-pine64-RC1 for testing (Pine64 device) http://resources.crux-arm.nu/files/devel-test/3.2/devices/pine64/crux-arm-r… http://resources.crux-arm.nu/files/devel-test/3.2/devices/pine64/crux-arm-r… Any comment, problem or improvement will be welcome. Regards, -- Victor Martinez Learning bit by bit | http://vjml.es

1 0

[ANN] CRUX-ARM 3.2 generic aarch64 rootfs RC1 ready for testing
by Víctor Martínez 22 May '16

22 May '16

Hello all, we have ready crux-arm-rootfs-3.2-aarch64-RC1 for testing (generic aarch64 build). This is the first 64b ARM release which will be in development status. Resources are available here: http://resources.crux-arm.nu/files/devel-test/3.2/devices/aarch64/crux-arm-… http://resources.crux-arm.nu/files/devel-test/3.2/devices/aarch64/crux-arm-… Any comment, problem or improvement will be welcome. Regards, -- Victor Martinez Learning bit by bit | http://vjml.es

1 0

[crossrootfs][PATCH] wget: add --disable-rpath
by John Vogel 15 May '16

15 May '16

a506ea8a0fb9dd56f755b12e5056ca73e85bcbdf Fix toolchain rpath from showin up in built binaries by add --disable-rpath configure switch. --- wget/Pkgfile | 1 + 1 file changed, 1 insertion(+) diff --git a/wget/Pkgfile b/wget/Pkgfile index 089e47d..a5d2a0c 100644 --- a/wget/Pkgfile +++ b/wget/Pkgfile @@ -19,6 +19,7 @@ build() { --sysconfdir=/etc \ --disable-debug \ --disable-nls \ + --disable-rpath \ --with-ssl=openssl \ --with-libssl-prefix=$CLFS/usr -- 2.7.4

2 1